Iron & Steel

Lime is fundamental to modern steelmaking. Across every major process route, from primary ironmaking through to final refining, quicklime is what turns molten metal into steel of specification, by combining with silica, phosphorus and sulphur to form a slag that can be removed from the melt. The purity, reactivity and consistency of that lime has a direct bearing on flux consumption, cycle time, refractory life and final product quality.

Buxton Lime is a long-standing supplier to the UK iron and steel industry. As the UK’s leading lime producer, we combine consistent kiln control with batch testing as standard, so the lime you receive performs the same way, heat after heat, delivery after delivery. Our Calbux quicklime range is manufactured to consistent high purity and supplied across a range of particle sizes and reactivities, matched to the specific demands of BOS, EAF and stainless steel production.

Basic Oxygen Steelmaking (BOS)

Basic Oxygen Steelmaking (BOS)

Electric Arc Furnace (EAF)

Electric Arc Furnace (EAF)

Stainless Steel

Stainless Steel

Where lime is used in the steelmaking process

Basic oxygen steelmaking (BOS)

The BOS process accounts for around 70% of world steel production. Our high-purity, fine-ground Calbux Flowfine quicklime is injected, together with magnesium or aluminium powder, into molten iron to reduce sulphur content ahead of the BOS process. During oxygen blowing, high-purity Calbux quicklime is then added to form slag to remove sulphur and other impurities.

Lime products for Basic Oxygen Steelmaking (BOS)

Electric arc furnace (EAF)

The EAF process, used to produce steel from scrap, represents around 30% of world steel production. As the arc melts the charge, high-purity Calbux quicklime is added to form a slag that removes sulphur and other impurities, while supporting foamy slag practice for a more stable, efficient melt.

Lime products for Electric Arc Furnaces (EAF)

Stainless steel production

In Argon Oxygen Decarburisation (AOD), used to bring stainless steel to its final specification, sulphur and phosphorus are removed by the addition of high-purity AOD Calbux quicklime. This stage demands lime of very high overall purity with very low residual calcium carbonate. Buxton Lime is the only UK lime supplier producing high purity AOD quicklime to this standard.

Lime products for Stainless Steel production

Why purity and consistency matter

Steelmakers work to tight flux specifications for good reason. Lower or variable CaO content means more lime is needed to hit the same basicity target, low reactivity slows slag formation and dephosphorisation, and poor basicity control accelerates refractory wear. Each of these has a cost, in flux consumption, cycle time, reline schedules and, ultimately, yield. Consistent, well-specified quicklime is one of the more direct levers steelmakers have over process performance and cost.

Why steel producers choose Buxton Lime

  • Consistent high purity. Every batch of Calbux quicklime is manufactured and tested to a consistent specification, so process performance doesn’t vary with the delivery.
  • A product range built for steelmaking. From Calbux Flowfine for pre-treatment to AOD-grade quicklime for stainless steel, our range is engineered for the reactivity and particle size each process stage requires.
  • Security of supply. As the UK’s No. 1 lime producer, operating across two sites in Europe, we’re structured to support high-throughput, continuous production schedules.
  • A technical partner, not just a supplier. Our team works with engineers, procurement and site operators to match product specification to furnace type and process conditions, not just to place an order.

Get in touch

Contact us today to arrange a consultation or site visit, and to discuss how our lime products can support your steelmaking process.

Contact us